Front Load Lowbed Trailer
Lowbed rack is welded by submerged welding machine from 20 mm x 150 mm STS2.3 Quality steel bottom and top flatsteel and 10 mm STS2.3 hub plate. It has "I" section and also includes 4 pes
•Rack Is supported with 160 NPI axle beams that crosses rack .
•It has been produced in welding constructions with gas metal arc welding as "I" crossing from high resistant steel considering overloads proper to capacity and intended usage.
•Total Length: 11700-13700 mm varies according to demand. lowbed can be extendable.
•Total Width: 2550 mm- 3300 mm varies according to demand
Front Load Lowbed Trailer, each one is with ll-14-16 tons capacity according to the trailer drum or disc brakes, hub centric, with 10 wheel nuts, and automatic slack adjuster.
Manufactured with air or hydraulic piston from NPU with 160
The WABCO or Haldex brand ABS or EBS brake system which is designed according to the European Standards is used .It consists of automatic brake ratchets, brake valves and brake bellows of 30.
It consists of automatic height adjusting system, Parabolic Z leaf springs, Suspension bellows, shock absorbers restricting extensive shaft movements and vlbrations.Mechanicalleaf spring suspension system.
24 V Illumination systems in conformity with the International standards, lamp with 7 functions, and electric socket with 7 pins are used .There are traffic warning panels on the vehicles
Consists of double cycle telescopic legs each of whicn nasa capacity of 24 tons.
King pin compliant with SEA/DIN norms and manufactured from steel (42 Cr Mo 4) wnich Is nlghly resistant to being cut, stretched and broken off is of flange type and can be disassembled and assembled back.
TIRES A ND WHEEL RIMS:
8+1 tires are used with different dimensions. Dimension that we use are;
•235/70 R 17.5
•245/70 R 17.5
•295/60 R 22.5
•12 R 22.5
•315/80 R 22.5
Water Retainer Ma ,Spare tyre carrier, Wheel leaning mounting, Fire extinguisher preserving cabinet.
Lowbed platform can be pool type
BPW, SAF, Gigant Axle drum or disc axle can be preffered.
•Chassis and side walls group m;mufactured from imparted metalsheet (Hardox or Domex).
•Tire mark according to request.
The surfaces are cleaned under high pressure with water and bonder chemical liquid. Then It Is dyed with one coat of epoxy die, and a last coat of acrylic die.It is very durable against chemical effectiveness. As desired, colours can be chosen from the RAlcodes.